Bellingham to Eugene by Train

Travel from Bellingham in Bellingham, WA to Eugene in Eugene, OR on the Amtrak Cascades. Approximately 436 miles in 8h 53m.

About this trip

The Amtrak Cascades connects Bellingham and Eugene directly, with no transfer required. The train operates multiple daily round trips between seattle and portland, and the segment between these two stations is one of 61 origin-destination pairs we catalog on this route.

Coverage of approximately 436 rail miles takes about 8h 53m on a typical schedule. Actual travel time varies with the specific train number, time of day, equipment used, and seasonal speed restrictions. Trains may run faster on the daylight schedules and slower at peak demand on shared-use trackage. A more granular schedule comparison can be found in independent corridor timetable reviews updated each season.

Things to look out for: Puget Sound shore between Seattle and Bellingham — beaches and ferry boats; Mount Rainier on clear days from Tacoma south.

Fares and ticketing

One-way fares between Bellingham and Eugene typically run between $28 and $94. The lower end represents Saver-bucket advance-purchase coach fares, while the upper end approximates same-day walk-up fares or premium-class buckets. Sleeping car accommodations on overnight runs of the Amtrak Cascades, when offered, are sold separately from rail fare and increase total ticket cost substantially.

RailRover does not sell tickets. To book this trip, visit the operating carrier (Amtrak (WSDOT/ODOT)) directly. Discounted fares are typically available with advance purchase, on midweek departures, and through loyalty programs. Several travelers track historical fare patterns on the corridor fare-watch newsletter to time their bookings.

Stations along the way

Between Bellingham and Eugene, the Amtrak Cascades calls at the following stations. Some trains may operate as "limited-stop" schedules and skip certain intermediate calls; check the published timetable for your departure.

• Bellingham — Bellingham, WA BEL
• Mount Vernon, WA — Mount Vernon, WA MVW
• Everett — Everett, WA EVR
• Edmonds — Edmonds, WA EDM
• Seattle King Street Station — Seattle, WA SEA
• Tukwila — Tukwila, WA TUK
• Tacoma Dome Station — Tacoma, WA TAC
• Olympia–Lacey — Olympia, WA OLW
• Centralia — Centralia, WA CTL
• Kelso–Longview — Kelso, WA KEL
• Vancouver, WA — Vancouver, WA VAN
• Portland Union Station — Portland, OR PDX
• Salem — Salem, OR SLM
• Albany, OR — Albany, OR ALY
• Eugene — Eugene, OR EUG

Getting to Bellingham and from Eugene

Both stations are accessible by local public transit, taxi, and rideshare. Bellingham sits in Bellingham, WA; arrival at Eugene places you in Eugene, OR. Transfers from the platform to onward bus, light rail, or rideshare are well marked at the major hubs along this route. For specific transit connections at either station, see our station guides linked above.

Frequently asked questions

How long does the train from Bellingham to Eugene take?

Approximately 8h 53m on a typical schedule, covering about 436 miles.

Is there a direct train?

Yes — the Amtrak Cascades operates multiple daily round trips between seattle and portland with no required transfer for this city pair.

How much does the ticket cost?

Approximately $28 to $94 for a one-way coach ticket. Premium classes and sleeping car accommodations cost more.

Can I bring a bicycle or pet?

Most long-distance and corridor trains accept checked or carry-on bicycles and small pets in carriers, with route-specific rules. Confirm with Amtrak (WSDOT/ODOT) at the time of booking.